Parts Express Free Shipping at 98 Dollars

Bohlender Graebener Neo3 Surface Mount Faceplate Pair

Bohlender Graebener Neo3 Surface Mount Faceplate Pair

Brand:| Model: Neo3
Overview
Faceplate can be used to easily install a Neo3 or Neo3-PDR on the surface of a speaker cabinet. Includes screws to attach element to the faceplate and a foam gasket for preventing air leaks between the faceplate and the cabinet.
Part # 
264-740
Weight: 1 lbs.  
IN STOCK
List Price$19.95
You Save30%
Your Price
$13.90
Buy 4-up$12.95
Part # 264-740
Qty:  PR
Available Payment Methods

Product Details

Bohlender Graebener Neo3 Surface Mount Faceplate Pair
Faceplate can be used to easily install a Neo3 or Neo3-PDR on the surface of a speaker cabinet. Includes screws to attach element to the faceplate and a foam gasket for preventing air leaks between the faceplate and the cabinet. Overall dimension: 5-1/8" round.


Product Specifications
  • Tweeter TypeTweeter Accessory
Bohlender Graebener Neo3 Surface Mount Faceplate Pair
  • BrandBohlender Graebener
  • ModelNeo3
  • Part Number264-740
  • UPC844632053061
  • Product CategoryTweeters
  • Unit of MeasurePR
  • Product Rating
    (6 Reviews)
  • Weight1 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Bohlender Graebener Neo3 Surface Mount Faceplate Pair
in the Tweeters product category.

Reviews

Bohlender Graebener Neo3 Surface Mount Faceplate Pair
Bohlender Graebener Neo3 Surface Mount Faceplate Pair is rated 3.8333 out of 5 by 6.
Rated 5 out of 5 by from Look at the picturesThere is a slight difference in the surface mounts and the flush mounts. You can see this by blowing up the pictures. The front of the tweeter's edge is different on the surface mount. Hope this helps.
Date published: 2013-05-13
Rated 4 out of 5 by from Surface Mount?These work and they look good but I still had to cut a hole to fit the tweeter into the front baffle of my speaker box. I had hoped to could be mounted on the surface.
Date published: 2013-09-21
Rated 4 out of 5 by from good stuff for NEO3 applicationYou'll need it for proper BG NEO3 application
Date published: 2013-09-21
Rated 4 out of 5 by from good stuff for BG NEO3You'll need it for proper BG NEO3 application
Date published: 2013-09-21
Rated 2 out of 5 by from Not my idea of a surface mountAs previously stated, this faceplate does NOT allow for surface mounting of a Neo3 driver. I gave it a 2.5 rating for "Performance" because it does make the cutout (still required) easier to cut. I gave "Value" a 1.5 rating because they seem way too expensive for what they are, what they do, and how well they work. I gave "Features" a 2.5 because there really aren't any features that do what they're supposed to do (other than a foam gasquet and some screws).Mounting a Neo on this facplate caused a tiny amount of the tweeter's radiating area to be covered by the horn flare. I can't help but wonder what subtle changes this plate has on the naturally open sound quality and wide dispersion of the driver. Using this faceplate also requires spacing the drivers farther apart. Considering the X-over point of the driver, the distance may end up too large for some MTM designs. Next time, for the price, I'll take a little extra time and make my own flush-mount cutouts again like I have in the past.
Date published: 2013-09-21
Rated 4 out of 5 by from Lost In Transition? Translation?It does say "surface mount" doesn't it? Whatever did the German manufacturers mean? The speakers mount into the back of the faceplates, but the vibrating membrane is even with the surface of the plane on which the mounts are screwed down on. The body of the speaker and the connecting terminals project rearward into the mounting surface. These are not "bolt on" driver holders. They work fine for me because I put them on a open back baffle and let the rear surface of the membrane radiate sound into the room (after carefully removing the back caps that come on the Neo3s). But you can't mount Neo3's on your dashboard with these. Maybe the units labled "Flush Mount" will allow that. They don't look like they will though. The descriptions are virtually identical with these "Surface Mounts."
Date published: 2013-09-21

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Bohlender Graebener Neo3 Surface Mount Faceplate Pair

Are they made of plastic or metal?

Asked by: MusicLover23
These are made with a plastic material.
Answered by: CurtisT
Date published: 2012-01-26

Customer Projects

Customer projects that include: Bohlender Graebener Neo3 Surface Mount Faceplate Pair

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Customers Also Bought

Banana Plug Red
Part # 090-465
Banana Plug Black
Part # 090-460
2-1/2" Poly Dust Cap
Part # 260-382
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1