Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email firstname.lastname@example.org
for a prompt reply.
Behringer XENYX 502 Mixer 5-Input 2-Bus
I use this to do worship. as I play my music from a laptop I get a hum. should I use a different input method?
Try lifting the ground on the laptops AC plug. # 110-211
Date published: 2015-04-29
how are the speakers hooked up?
You would run the main outputs from this mixer to an amplifier.
Date published: 2015-04-17
What all cords and equipment you need for theBehringer XENYX502 5-Channel Mixer?
Please contact our tech support for more help with this question, email@example.com or 800-338-0531 x1.
Date published: 2015-03-02
Does the Xenyx 502 sold presently come with the phantom power?
Hi, Someone ask almost 2 years ago if P-E was selling the 502 with Phantom power and he was replied no at the time. Is that still the case or does the units available come with this phantom power. I would like to use it with a Dayton EMM-6 mic. Thanks
Yes the new 502 model does supply Phantom power.
Date published: 2012-12-05
What is this unit powered from? Wall-Wart? What Voltage input? Can I use it in a mobile 12V application?
These are powered with a wall-wart type power supply, however it uses a proprietary plug and only the Behringer power supplies fit it.
Date published: 2012-10-31
My box says it has phantom power, does it have it?
I did not find a phantom power switch or control, is this automatic? I'm using this with a dayton mic and e-mu 1212m will this combo work? I'm using this for audio measurements of a room.
I've looked over the manual. The 802 has a phantom switch but cant see any phantom on the 502. Unless it's always on, which I doubt. Could it be on the power supply? They dont cover this section well. Try out a condenser (phantom powered) mic and see. Just make sure the unit is off when you hook up your mic.
Date published: 2012-11-22