Behringer XENYX 1202 Mixer 12-Input 2-Bus

Behringer XENYX 1202 Mixer 12-Input 2-Bus

Brand:| Model: XENYX 1202
Introducing XENYX — Premium analog mixers from Behringer • Mfg. #XENYX 1202 • #Inputs: 12 (4 XLR) • Bus: 2 • Digital EFX: No • USB Interface: No
  • Premium ultra low-noise, high headroom analog mixer
  • 4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
  • Neo-classic "British" 3-band EQs for warm and musical sound
  • 1 post fader FX send per channel for external FX devices
  • Main mix outputs plus separate control room, phones and stereo CD/tape outputs
  • CD/tape inputs assignable to main mix or control room/phones outputs
  • FX to control room function helps to monitor effect signal via headphones and control room outputs
Part # 
Weight: 6.9 lbs.  
List Price$134.99
You Save33%
Your Price
Part # 248-582
Qty:  EA
Available Payment Methods

Product Details

Behringer XENYX 1202 Mixer 12-Input 2-Bus
Introducing XENYX — Premium analog mixers from Behringer. With close to one million units sold, the UB mixer series has become one of the most popular mixer series of all time that has no doubt connected musicians all over the world. Behringer's new XENYX mixers will take you to an even higher plane.

  • Mixer TypeAnalog
  • XLR Mic Inputs< 6
Behringer XENYX 1202 Mixer 12-Input 2-Bus
  • BrandBehringer
  • ModelXENYX 1202
  • Part Number248-582
  • UPC4033653020749
  • Product CategoryMixers - Live Sound & Recording
  • Unit of MeasureEA
  • Product Rating
    (1 Reviews)
  • Weight6.9 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Behringer XENYX 1202 Mixer 12-Input 2-Bus
in the Mixers - Live Sound & Recording product category.


Behringer XENYX 1202 Mixer 12-Input 2-Bus
Behringer XENYX 1202 Mixer 12-Input 2-Bus is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Behringer XENYX 1202 Mixer 12-Input 2-BusOne of the reasons I purchased this one compaired to a smaller unit, was the slider, or master volume - it was really nice.I had to put some tape over the power LED - it was too bright, but this unit fuctions wonderfully!
Date published: 2012-09-10

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Behringer XENYX 1202 Mixer 12-Input 2-Bus

i need the power plug for the1202 fx

Asked by: weldingman
We do not offer the power supplies for these mixers, you will have to contact Behringer directly for this.
Answered by: MattP
Date published: 2014-11-25

I couldn't see where it says this mixer is self-powered? Is it? Or do I still have to have to have a power amp?

Asked by: Coque
This is not a powered mixer and will require a separate amplifier.
Answered by: MattP
Date published: 2014-11-09

Will this mix audio signals? (a.k.a. will this put RCA or 3.5mm 

Asked by: TheReviewer
Please contact our tech support for more help with this question, or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-08-15

Does this mixer have reverb?

Asked by: David Dee
Unfortunately no, this does not have revere or effects.
Answered by: MattP
Date published: 2014-08-11

Does this mixer have 1/4 sub outs?

Asked by: Johnny1961
This mixer has 1/4" outputs, but it does not have dedicated sub outputs.
Answered by: MattP
Date published: 2014-08-11

I hooked everything to the speakers but was not getting a full sound. when i I unplugged the chord i was getting full sound what is the deal

Asked by: trube50
I think you need to check your connection cords from this mixer to your amplifier. Be sure to use the main output not an insert or tape output--it is an RCA stereo setup and has less output than the mains L&R phone jacks. They keep a recorder's level at -10 or -20db which your amp may see as too low a level. If this does not work, add this to your question--Full sound/tone? output level? AND if you unplug the chord--you won't get any sound.
Answered by: Joe from San Francisco
Date published: 2014-06-06

Customer Projects

Customer projects that include: Behringer XENYX 1202 Mixer 12-Input 2-Bus

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA

© 1996-2014 Parts Express, All Rights Reserved

Live Chat Software