free shipping at parts express

Behringer FBQ100 Shark Automatic Feedback Destroyer

Brand:|Model: FBQ100|Part # 248-6676
No need for compression, noise gate, or even a DI box...when you have the Behringer SHARK FBQ100, you have all the control you need.
Awaiting Updated Due Date
List Price$149.99
You Save33%
Your Price
Part # 248-6676
  • High performance single channel Feedback Destroyer with integrated microphone preamp, delay line, noise gate and compressor
  • Automatically and "intelligently" locates and destroys up to 8 feedback frequencies
  • Narrow FBQ filters for extremely effective feedback suppression, while keeping highest sonic quality
  • Ultra-low noise Mic/Line input with Gain control and +48 V phantom power
  • Delay line with up to 2.5 seconds of delay, adjustable in meters, feet and msec
  • Noise gate with automatic and manual parameter settings
  • Automatic compressor with variable density

Product Details

Behringer FBQ100 Shark Automatic Feedback Destroyer

Behringer's SHARK FBQ100 feedback destroyer is integrated with a microphone preamp, delay line, noise gate, and compressor all in one. "Learn Mode" automatically equalizes your PA and destroys unwanted feedback. The search algorithm ensures feedback frequencies are attenuated within a fraction of a second, using narrow 1/60 octave single-shot filters. The remaining filters automatically take action as required, adjusting only the specific frequencies causing the feedback, so your music stays powerful and alive.

The adjustable mic preamp, with switchable +48V phantom power and Ultra-Low Noise technology, guarantees noise-free, ultra-musical sound. You can choose professional studio (+4 dB) or microphone output level, so the FBQ100 can be directly connected to the mic input of a recording device. Virtually any type of signal can be connected and converted.

Delay lines are required to compensate for time variations resulting from speaker positioning in large venues. The FBQ100's delay can be adjusted in meters, feet or milliseconds. The maximum delay time of 2.5 seconds corresponds to a distance of 850 meters. Combining several FBQ100s with the optional rack-mount kit puts a complete professional loudspeaker management system at your fingertips.

Like a sonic Swiss army knife, you'll want the FBQ100 close at hand for all your gigs and studio engagements. In fact, you'll want several, which is why they are sized to fit five across your rack.

Specifications: • Audio input connectors: XLR and 1/4" TRS jack • Audio output connectors: XLR and 1/4" jack • Input impedance: 6k ohms balanced, 3k ohms unbalanced • Output impedance: 60 ohms balanced, 30 ohms unbalanced • Input nominal operating level: Microphone or line level source (switchable) • Output nominal operating level: Microphone level source or -4 dBu (switchable) • Max. input level: +19 dBu at microphone level and line level • Max output level: +20 dBu at +4 dBu nominal level, -12 dBu at microphone level • Frequency response: 10 Hz to 21 kHz • Noise: >92 dB at line level, unweighted, 22 Hz to 22 kHz; >89 dB at microphone level, unweighted, 22 Hz to 22 kHz • THD: 0.007% typ. @ +4 dBu, 1 kHz, gain 1 • Dimensions: 2.2" H x 3.5" W x 5.2" D (56 x 88 x 132 mm) • Weight: 0.84 lbs.

Behringer FBQ100 Shark Automatic Feedback Destroyer
  • BrandBehringer
  • ModelFBQ100
  • Part Number248-6676
  • UPC705105164182
  • Product CategoryFeedback Suppression
  • Unit of MeasureEA
  • Weight2.55 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the Behringer FBQ100 Shark Automatic Feedback Destroyer
in the Feedback Suppression product category.


Behringer FBQ100 Shark Automatic Feedback Destroyer

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Behringer FBQ100 Shark Automatic Feedback Destroyer

Does this have line level outputs? I want to connect it to my amplifier.

Asked by: opps
No, this only has balanced inputs and outputs so a converter would be required. Something like below would work.
Answered by: MattP
Date published: 2015-02-11

Can this be used to Eq a subwoofer for home theatre?

Asked by: Ralphy
This unit does not have a pmanual parametric EQ function like the other feedback destroyers that are used for this, so unfortunately it will not work for that application.
Answered by: MattP
Date published: 2013-05-16
  • 2016-04-30T06:48CST
  • bvseo_cps, prod_bvqa, vn_cps_3.2.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_248-6676, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software