294-678_ALT_0.jpg
294-678_ALT_0.jpg
 
294-678_ALT_0
 

B&C 10HPL64 10" Neodymium Woofer

Brand:| Model: 10HPL64
Overview
The B&C Speakers 10HPL64 high efficiency 10" woofer uses an FEA computer-designed neodymium magnet assembly, resulting in an extremely lightweight (only 4.4 lbs.) yet powerful professional speaker.
Highlights
  • High energy neodymium magnet assembly
  • Aluminum basket is designed to dissipate heat
  • High in performance, low in weight
Part # 
294-678
Weight: 5 lbs.  
IN STOCK
List Price$222.05
You Save40%
Your Price
$133.23
Part # 294-678
Qty:  EA
Available Payment Methods

Product Details

B&C 10HPL64 10" Neodymium Woofer

The B&C 10HPL64 10" speaker's cast aluminum basket is designed to effectively dissipate heat during demanding use at full power, reducing power compression. Usefully lightweight thanks to its high-energy neodymium magnet, the 10HPL64 is recommended for compact two-way pro speaker systems in which power is limited to 200 watts RMS or 400 watts program.



Product Specifications
  • Nominal Diameter10"
  • Power Handling (RMS)200 Watts
  • Power Handling (max)400 Watts
  • Impedance8 ohms
  • Frequency Response60 to 4,000 Hz
  • Sensitivity99 dB 1W/1m
  • Voice Coil Diameter2.5"
Thiele-Small Parameters
  • Resonant Frequency (Fs)61 Hz
  • DC Resistance (Re)5.4 ohms
  • Voice Coil Inductance (Le)0.5 mH
  • Mechanical Q (Qms)4.5
  • Electromagnetic Q (Qes)0.33
  • Total Q (Qts)0.31
  • Compliance Equivalent Volume (Vas)1.1 ft.³
  • BL Product (BL)15 Tm
  • Diaphragm Mass Inc. Airload (Mms)29g
  • Maximum Linear Excursion (Xmax)4 mm
  • Surface Area of Cone (Sd)320 cm²
Materials of Construction
  • Cone MaterialPaper
  • Surround MaterialCloth
  • Voice Coil Wire MaterialAluminum
  • Voice Coil FormerFiberglass
  • Magnet MaterialNeodymium
Mounting Information
  • Overall Outside Diameter10.3"
  • Baffle Cutout Diameter8.8"
  • Depth4.8"
  • # Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume0.16 ft.³
  • Sealed F3168 Hz
  • Vented Volume0.36 ft.³
  • Vented F3106 Hz
B&C 10HPL64 10" Neodymium Woofer
  • BrandB&C Speakers
  • Model10HPL64
  • Part Number294-678
  • UPC844632002243
  • Product CategoryWoofers, Subwoofers & Midrange Speakers
  • Unit of MeasureEA
  • Product Rating
    (5 Reviews)
  • Weight5 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the B&C 10HPL64 10" Neodymium Woofer
in the Woofers, Subwoofers & Midrange Speakers product category.

Reviews

B&C 10HPL64 10" Neodymium Woofer
B&C 10HPL64 10" Neodymium Woofer is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from ExcellentI used this in its "Project Ideas" box, with a Selenium D210 horn driver (now D220) (SKU 264-271) and a Dayton 1600 hz (SKU 260-160) crossover. The horn driver runs through a Selenium HC23-25 (SKU 264-318) horn. I had to put the vent in the back (with the crossover) because the box is pretty small. Total weight = 35 pounds, using 3/4-inch plywood. I think the plywood is most of the weight. These speakers sound beautifully clear.
Date published: 2009-12-18
Rated 5 out of 5 by from Provides Best Sounds EverI'd long forgotten what excellent sounds I now experience. These two woofers have provided the most pleasant experience with high quality sounds from television, tape deck, compact discs, and radio than I can remember.
Date published: 2009-07-25
Rated 5 out of 5 by from This is a great driverI built a three way cab., with an Eminence 3015LF also Neo and a Selenium horn and the B&C neo 10" sounds great in this configuration. I will use it again.
Date published: 2009-04-13
Rated 5 out of 5 by from Beautifully Musical and clearAt this price you can't afford to not try them.Performance is excellent. Very good sensitivity means you get a big bang for your buck. The cast aluminum frame is rigid and dissipates heat well. With the Neodymium magnet, that makes this very lightweight motor for the amount of air it can push. You won't break your bank or your back with these beauties. They keep a tight low-end and a controlled high end... The Ferrari of loudspeakers... Highly recommended!
Date published: 2007-12-02
Rated 5 out of 5 by from exellenti got two of those babys in a bass ammp italian made (mark bass)and a piezo,300watts combo,my 5 and six strings basses never sounded so good,powerfull in lowwww end one word fantastic
Date published: 2007-05-25

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
B&C 10HPL64 10" Neodymium Woofer

How well will this speaker work using the Dayton dta120 amp

Asked by: mcb1979
Due to the drivers high sensitivity this will work well with that amplifier, but it will still be limited in overall output. if this is for a home application that may not matter.
Answered by: MattP
Date published: 2014-08-18

How well would this work with the small dta120 amp

Asked by: mcb1979
This will be able to achieve output above 110 dB with as little as 50 watts, so it should work well with this amplifier.
Answered by: MattP
Date published: 2014-08-18

Would this woofer work in a Onken bass horn cabinet better than a Vifa 10"

I got a hold of a pair of Iwata 600 horns paired with a pair of Radian 1" compression drivers.I am crossing this drivers at around 1.5 K to the Onken bass horns with a 10" Vifa woofers that are now out of production.While the Vifa might reach down to 25 HZ, I am finding that I might need more output in the midrange section with more efficiency.I am using a Rane active 3 way active crossover and I am also using a Crown XTi 2002 amplifier for the bass bins.
Asked by: Bemopti123
Most likely this will sound better through the midrange. I don't know what Vifa 10" you have, but I don't know of any Vifa 10" ever produced that was meant to crossover as high as 1500hz. This is a pro woofer that is meant to reproduce sound up that high, so it should fit the bill better. Looking at the FR graph it will do pretty well past your crossover point. Also, if you are running bass bins you shouldn't miss the Vifa's extra bit of low end extension.
Answered by: Travis Rysdam
Date published: 2012-05-28

Customer Projects

Customer projects that include: B&C 10HPL64 10" Neodymium Woofer

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1