free shipping at parts express

Manuals & Resources

Band-It Edge Trimmer

Brand:|Model: 33437|Part # 260-058
Whether you're trimming the edges of vinyl, melamine, or veneer, the Band-It edge trimmer is the tool you need. Its handy dual-bladed design makes it very easy and safe to put a clean edge on any 90-degree corner.
In Stock
List Price$11.05
You Save10%
Your Price
Buy 4+$9.11
Part # 260-058
  • Trims edges clean and flush
  • Cuts in both directions
  • Uses inexpensive, easy-to-replace blades (260-059)
  • Minimum exposed cutting surface for protection

Product Details

Band-It Edge Trimmer

Whether you're trimming the edges of vinyl, melamine, or veneer, the Band-It edge trimmer is the tool you need. Its handy dual-bladed design makes it very easy and safe to put a clean edge on any 90-degree corner. When the blades start to dull, you can even rotate them once before you need to replace them. Extra blades sold separately (260-059).

Band-It Edge Trimmer
  • BrandBand-It
  • Model33437
  • Part Number260-058
  • UPC717185334379
  • Product CategoryKnives
  • Unit of MeasureEA
  • Product Rating
    (15 Reviews)
  • Weight0.14 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Band-It Edge Trimmer
in the Knives product category.


Band-It Edge Trimmer
Band-It Edge Trimmer is rated 4.2667 out of 5 by 15.
Rated 5 out of 5 by from A Must HaveThis tool is a must have when working with either paper backed wood veneer, or vinyl laminate. I use it with both and acheive nice smooth flush cuts with it. The trick is to regularly replace the blades, which PE also sells.
Date published: 2014-02-06
Rated 1 out of 5 by from bad designbought the edge trimmer together with some walnut veneer and replacement blades.unfortunately it only works if the cut follows the grain 100%, and the blade wears out extremely fast.i ended up splintering the edge of the veneer when cutting across the grain at the bottom of the speaker, and when trimming a slightly angled edge.a simple utility knife works better.
Date published: 2013-09-09
Rated 5 out of 5 by from perfect for people who must have exact flush edges.I am doing a speaker project and the wood I am using is particle board and this cutter works just great I am very very picky about my work being perfect and I was reading the reviews and one sayed it didnt cut the edges flush but maybe he wasnt doing it right. This is my first ever speaker project and when you slide the cutter over first it does leave a little bit hanging off but it was super easy to just tilt the cutter a little bit and it trimmed the excess off very easily and left my speakerbox with a perfect flush edge and I couldnt be happier.It is definatly a very handy and cheap tool to buy that you will NOT be dissapointed you bought
Date published: 2012-12-06
Rated 3 out of 5 by from Handy~But could be a better!This is a handy tool when it comes to handling razor blades, but falls short in how close it trims to the edge of your speaker cabs! It allways leaves about a 1/16" left to be trimmed off by other means! It sits in the 20 year drawer now!The Bandit Blades for this device are nice with a standard bevel on one edge and a slight bevel on the other side. This makes for very little nicking on your project then with a x-acto or utility blade. I use these blades by themselves for trimming vinyl lamenate and they have allways done a nice and neat job! Just watch your fingers on how you handle them and keep the blade wiped down with 3 in 1 oil or goo gone sprittzed on a rag to wipe off residual adhesive for consistant smooth cuts
Date published: 2011-03-26
Rated 5 out of 5 by from Watch those bladesWorks as advertised. Read direction carefully before changing blades.
Date published: 2009-08-10
Rated 5 out of 5 by from Helpfull trimmerI used this trimmer first time and very like it. It's so easy to use and it cuts very good. Before I used utility knife and cuts were not so straight. No I have no problem to trim the edges. I recommend to everyone to buy it if you gonna use veneer.
Date published: 2009-06-05
  • 2016-02-11T06:42CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_en_US, sid_260-058, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
Band-It Edge Trimmer

Recently Viewed Products

Part # 260-058
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software