360-627_ALT_0.jpg
360-627_ALT_0.jpg
 
360-627_ALT_0
 

Automatic Wire Stripper with Cutter

Overview
All automatic wire strippers should be this easy to use! With this wire stripper all you have to do is set the strip length, insert a wire, squeeze the handles, and you’re finished.
Highlights
  • Works with single-conductor 10 to 24 AWG stranded or solid wire
  • Great for stripping speaker wire
  • Easy to strip the same amount of insulation, every time
Part # 
360-627
Weight: 0.6768 lbs.  
IN STOCK
Regular Price$13.49
You Save14%
Sale Price
$11.50
Part # 360-627
Qty:  EA
Available Payment Methods

Product Details

Automatic Wire Stripper with Cutter

The automatic wire stripper features a convenient wire cutter below the stripping jaws. Works with 10 to 24 AWG stranded or solid wire. Strip length may be set between 3/16" to 7/8" (5 to 23 mm). Licensed by Elcontrol S.P.A. Italy. Patent U.S.A. No. 4366730, Patent Taiwan No. 25333.



Automatic Wire Stripper with Cutter
  • BrandParts Express
  • Part Number360-627
  • UPC844632014024
  • Product CategoryWire Cutters
  • Unit of MeasureEA
  • Product Rating
    (40 Reviews)
  • Weight0.6768 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the Automatic Wire Stripper with Cutter
in the Wire Cutters product category.

Reviews

Automatic Wire Stripper with Cutter
Automatic Wire Stripper with Cutter is rated 4.2 out of 5 by 40.
Rated 1 out of 5 by from JunkStripped two or three wires ok but now just mangles them all. Adjustment does nothing and either end of the full turn. Worthless.
Date published: 2014-08-20
Rated 5 out of 5 by from GREAT TOOLThis is the best wire stripper I have found .Very easy to use
Date published: 2014-02-22
Rated 1 out of 5 by from Poor performanceI agree with tjbaudio 100%. The pressure adjustment knob does nothing to increase or decrease the jaw pressure. This tool strips the jacket and cuts half the strands off the cable. It makes no difference as to wire gauge (AWG) or jacket material.It does not work as advertised.
Date published: 2012-11-23
Rated 4 out of 5 by from Works good for meI use this tool for speaker wire from 14g to 22g and it works really good. it does get a little aggressive on lighter gauge but it hasn't been much of an issue for me. Big time saver and I like that!
Date published: 2012-07-27
Rated 4 out of 5 by from Click snip splitWorks good for most normal sized speaker wire that I've tried. I just used them on 28awg power wire for neons in a car with no problems. I carefully nibbled away at some 8awg cable just to see what they would do. I didn't squeeze them all the way, just enough to pull a little and then kept turning the cable to get all the way around it. The cutters on the bottom are alright but have left straglers here and there. Overall they are pretty nice and can cut both conductors and strip them both without having to peel them apart first.
Date published: 2011-10-04
Rated 5 out of 5 by from Great Stripper with Cutter ...It is good .... It works in any size or wire ... The smallest wire canbe stripped to ...
Date published: 2011-09-27

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
Automatic Wire Stripper with Cutter

Wire insulation marring?

I can't seem to be able to adjust the tension to eliminate marring in the wire insulation. The metal bar that grips the insulation while the teeth cut and pull off the stripped section seems to be digging in deep enough to cut the insulation. Even if I loosen the tension, it still mars. Anyone else experience this?
Asked by: Sam P
This effect is typical of this kind of tool, and some units are worse than others. It is not necessarily a defect, but more a side-effect of the design and implementation. For most users and applications, the slight marring is not enough of an issue to warrant seeking a solution. If your application is cosmetically critical, you may try wrapping the wire(s) with a few layers of electrical tape or similar material to act as a buffer.
Answered by: RussR
Date published: 2011-11-30

Customer Projects

Customer projects that include: Automatic Wire Stripper with Cutter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1