Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Aurum Cantus AC-250SW 10" Woofer
will this product list work for a 2 way setup @2500hz and what would be the ohm load to my amplifier?
my amp is a Kenwood Basic M2 220watts rms@8ohm .004% THD 120db S/N ratio along with Kenwood Basic C2 preamp designed for this amp.Aurum Cantus AC-250SW 10" WooferWhat is the optimal enclosure for this woofer in cu.ft.Aurum Cantus APR2.1 Ribbon TweeterJantzen 2.7uF 800V Z-Superior CapacitorJantzen 10uF 400V Z-Standard CapacitorDayton Audio DMPC-5.6 5.6uF 250V Polypropylene CapacitorDayton Audio DMPC-12 12uF 250V Polypropylene CapacitorJantzen 0.47mH 18 AWG Air Core InductorJantzen 0.95mH 18 AWG Air Core InductorJantzen 1.1mH 18 AWG Air Core Inductor
My guess is it would work, but be far from optimal. Most ribbons are lucky to get to 2.5kHz, and even though the spec sheet shows the 10" peaking at 3kHz, it's directivity will be beyond its pistonic range and beaming by that point. Most 10" drivers will not be able to handle wavelengths above 1.2kHz to 1.3kHz, and due to the driver being what it is, it will likely not even get that far.BTW- the manufacturer's pdf says this driver is 4 ohms, not 8 ohms, so that also puts a kink in the idea.
Date published: 2013-04-13
Specs show 8ohm and picture shows 4ohm which one is it
pdf also shows 4 ohm impedance spec, and that is from the manufacturer.
Date published: 2013-02-05
What size sealed box ?
Recommended sealed box for this woofer is 0.75 cubic feet with an F3 of 62 Hz and F10 of 36 Hz.
Date published: 2013-03-02
In terms of SQ, how does this compair to the AC-250F1 10in or the AC-300 12in?
Sound quality is completely subject to opinion, so unfortunately, this is not the type of question that we can answer with any degree of accuracy. You may prefer one kind of sound, I may prefer something different, and your neighbor may not be able to distinguish an appreciable difference between four different woofers.
Date published: 2014-04-22
Is this a woofer or a subwoofer? How would a pair of these perform as a subwoofer in a ported box in my car? Say in comparison to the Dayton HO 10"? I have 500watts of power.
This will be classified more as a woofer than a subwoofer. The Dayton HO 10's will provide more output in a smaller box.
Date published: 2014-04-08