Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
Aurum Cantus AC-165 6-1/2" Carbon Fiber/Kevlar Woofer
Waht is the Speaker Height?
I looking for 6" speaker with height up to 2"Thanks ,Yaron
For most of our drivers, the mounting depth is the height and we refer to this as the C dimension. This driver has a mounting depth (height) of 2-7/8".
Date published: 2011-04-06
Whare can I find and review detailed technical specs for the Aurum Cantus woofer line? e.g. frequency-response curves, detailed demensions etc.
This manufacturer's website features downloadable documentation on most of their products. You can access their website at:http://www.aurumcantus.com
Date published: 2013-08-07
Are these TS paramaters correct?
I suspect there may be a problem with the datasheet from Aurum Cantus on these... An older edition of the PE catalog http://www.partsexpress.com/catalog/pdf/203pec08.pdf lists one set of TS parameters for this speaker. The current PE description and the Aurum Cantus datasheet agree but list a different set of values from the ones in the older catalog. I have tried these speakers in both .75 and .38 ft^3 sealed boxes and I the response I am hearing seems to agree with the older PE catalog data.
The copy in our 2010 catalog was in error. The current catalog and web information is the correct information for this product.
Date published: 2011-10-15
What is the width across the flats?
The diameter across the flats is considered the "Overall diameter" in our description, and is 6-3/8". Across the outside of the mounting holes, the greatest diameter, will measure approximately 6-15/16".
Date published: 2012-04-24
What crossover can you recommend, for 2 way system with this woofer?
There are many options that will work, we would need to know which tweeter is being used before we can help with a crossover.
Date published: 2013-09-06
I planning to use Aurum Cantus G2Si Ribbon Tweeterhttp://www.parts-express.com/pe/showdetl.cfm?partnumber=276-400
The highest recommended crossover frequency for the G2Si tweeter is 2,500 Hz so you cannot go any lower than this. The woofer will start to beam around 2,700 Hz, so an ideal crossover point would be between these two frequencies.
Date published: 2013-09-09