Parts Express Free Shipping at 98 Dollars

302-651_ALT_0.jpg
302-651_ALT_0.jpg
 
302-651_ALT_0
 

AudioSource AMP210 2 x 90 Watt Power Amplifier

Brand:| Model: AMP210
Overview
AudioSource's AMP210 features 90 watts of stereo power, bridgeable to 250 watts, in a rackable amplifier design. Experience you can trust, performance you can count on.
Highlights
  • Triple-Darlington power amplifier stages
  • Dual-differential error outputs
  • Independent rear left / right master level controls and high level input
  • Signal sensing power-on with 12V trigger
  • Rack-mount-ready amplifier design that delivers up to 250W into 8 ohms bridged
Part # 
302-651
Weight: 34 lbs.  
IN STOCK
List Price$529.99
You Save24%
Your Price
$399.99
Part # 302-651
Qty:  EA
Available Payment Methods

Product Details

AudioSource AMP210 2 x 90 Watt Power Amplifier

AudioSource has been designing and building amps for over 20 years. During this time, they've continually refined their products to balance power, sound clarity and long-lasting performance. The AMP210 is a full bandwidth capable, bridgeable amplifier that features A/B speaker switching for flexibility. A robust power supply, triple-Darlington power amp stages, and dual-differential error output devices are built into the standard design to withstand torture testing procedures—they wouldn't have it any other way. With source override, the AMP210 accommodates necessary interruptions such as PA systems, game consoles, phone calls or even doorbells. Users can set the master levels for volume and balance on the back of the system (hidden from children), then make fine adjustments on the front. AudioSource's AMP210 features 90 watts of stereo power, bridgeable to 250 watts, in a rackable amplifier design. Experience you can trust, performance you can count on.

Specifications: • Power output: 90 watts RMS per channel (20-20,000 Hz, < 0.1% THD @ 8 ohms), 250 watts RMS bridged mono (20-20,000 Hz, < 0.2% THD @ 8 ohms) • Frequency response: 10-50,000 Hz (+0 dB, -3 dB) • Signal to noise ratio: 100 dB A-weighted • Channel separation: 69 dB @ 1 kHz (at rated power into 8 ohms) • Input sensitivity: 0.350-2.8V • Power consumption: 700W max • Dimensions: 3.8" H x 16.5" W x 13.75" D.



Product Specifications
  • Power Output (RMS Per Channel @ 8 ohms)90 Watts
  • Power (RMS/Channel 8 ohms)51 - 100 Watts
  • Weight Range30 to 39 lbs.
AudioSource AMP210 2 x 90 Watt Power Amplifier
  • BrandAudioSource
  • ModelAMP210
  • Part Number302-651
  • UPC041087010117
  • Product CategoryAmplifiers
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight34 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the AudioSource AMP210 2 x 90 Watt Power Amplifier
in the Amplifiers product category.

Reviews

AudioSource AMP210 2 x 90 Watt Power Amplifier
AudioSource AMP210 2 x 90 Watt Power Amplifier is rated 4.0 out of 5 by 2.
Rated 3 out of 5 by from Unit lacks powerI put this amp behind a Yamaha Receiver and it would not play loud (100-105db) without tripping the overload circuit. The sound is clean and quiet but no power. I replaced it with a NAD (100W x 5) and the problem disappeared.
Date published: 2013-02-12
Rated 5 out of 5 by from Great Product, well builtI used 28 of these bad boys on a home project, all on racks. They work great, look great, and the features are just what anyone would need in a multiroom situation. Even having one hooked up alone was impressive.
Date published: 2013-11-03

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
AudioSource AMP210 2 x 90 Watt Power Amplifier

Good Choice?

I am looking to power a multi-speaker system that includes a Niles SSVC-6 Speaker Selector / Volume Control unit that has a max input of 100WPC RMS @ 8 ohms. Is this amp my best choice or are there others I missed?
Asked by: Hodedo
This will be a good choice for that application.
Answered by: MattP
Date published: 2013-01-02

With 250W bridged into an 8 ohm loan what would be the approximate output bridged into 16 ohms?

Asked by: GolfHawk
The power will be roughly half, so about 125 watts into a 16 ohm load.
Answered by: MattP
Date published: 2014-04-14

Customer Projects

Customer projects that include: AudioSource AMP210 2 x 90 Watt Power Amplifier

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1