245-871_ALT_0.jpg
245-871_ALT_0.jpg
 
245-871_ALT_0
 

ART ProMIX 3-Channel Mic Mixer

Brand:| Model: ProMIX
Overview
The ART ProMIX mixes three microphones into a transformer balanced mono output. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control.
Highlights
  • Perfect for small projects or portable audio jobs
  • Great for adding extra mics to a mixer
  • Three balanced XLR mic inputs with level controls
  • Low-cut switches on each channel
  • 1/4" Aux/Headphone output
  • Individually switchable phantom power
  • Output clip LED
Part # 
245-871
Weight: 2.5 lbs.  
IN STOCK
Order Soon - Only 1 Left In Stock
List Price$125.00
You Save24%
Your Price
$95.00
Part # 245-871
Qty:  EA
Available Payment Methods

Product Details

ART ProMIX 3-Channel Mic Mixer

The ART ProMIX mixes three microphones into a transformer balanced mono output. Each mic channel on the ProMIX has both phantom power and low-frequency cut selectable via DIP switches plus a level control. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/Aux output. And if AC power is not available, the ProMIX runs on batteries as well.

Specifications: • Max gain: +60 dB • Max output level: +14 dB • Max input level: -14 dB • THD: 0.02% • Dimensions: 5.625" x 3.75" x 1.75".



PRODUCT SPECIFICATIONS
  • Mixer TypeAnalog
  • XLR Mic Inputs< 6
ART ProMIX 3-Channel Mic Mixer
  • BrandART
  • ModelProMIX
  • Part Number245-871
  • UPC840402014225
  • Product CategoryLine Mixers
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight2.5 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the ART ProMIX 3-Channel Mic Mixer
in the Line Mixers product category.

Reviews

ART ProMIX 3-Channel Mic Mixer
ART ProMIX 3-Channel Mic Mixer is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from Perfect for driving long mic cablesI bought two of these to let me run more mics in an overhead array on a high school stage. They work great driving the 150' long cabling to the jacks on the back wall where we put the sound board during shows. The exact same microphones phantom powered from the board sound like junk compared to the ones plugged into these mixers. I'm going to get 2 more of them just to clean up the signal, and also to free up two more XLR jacks on the stage.
Date published: 2010-02-22
Rated 4 out of 5 by from They perform as advertisedI bought two of these. The mic inputs have high gain and are low noise even when operating the power via the wall wart. Also it is convenient to know each mic channel is selectable to provide phantom power if your mic needs it. They are very convenient for those times when you need to be "compact" and "portable" and don't want to lug around your heavy duty mixer/amp/rack equipment just for those smaller gigs. The reason I bought these little mixers is to use them with my two Fishman SoloAmps (also a great product) for micing multiple musicians. I also run "jam" sessions and these mixers are great for micing multiple musicians. I recommend this mixer for anyone looking for a compact solution for mic mixing. If you decide to run these on battery power instead of the supplied wall wart, please note....The only drawback is the battery compartment. There are no mounting clamps to hold the batteries in place inside the unit. You just shove the batteries (two 9V) into the body of the unit after connecting the battery connectors. The loose batteries could possibly rattle and flop on top of the components mounted on the P/C board. A simple solution for the consumer would be to pack a little foam rubber around the batteries to hold them in the compartment tight. The compartment is just a piece of thin cardboard. Nothing in the operating instructions tells you how long the batteries last when powering the mixer.
Date published: 2009-04-13

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
ART ProMIX 3-Channel Mic Mixer

What size 12 vdc plug and current is required for the power supply

Asked by: MGuy57
This unit actually ships with a power supply.
Answered by: MattP
Date published: 2014-08-29

Customer Projects

Customer projects that include: ART ProMIX 3-Channel Mic Mixer

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software