120-1030_ALT_3.jpg
120-1030_ALT_3.jpg
 
120-1030_ALT_1
 
120-1030_ALT_2
 
120-1030_ALT_3
 

9 VAC 1000mA AC Adapter

Overview
This high quality AC adapter is useful for many applications. Always select an adapter with the same voltage.
Highlights
  • 9 VAC output
  • 2.1 x 5.5 mm right angle plug
  • 6 foot cable
  • UL listed
Part # 
120-1030
Weight: 0.653 lbs.  
IN STOCK
Your Price
$11.62
Buy 10-up$10.03
Part # 120-1030
Qty:  EA
Available Payment Methods

Product Details

9 VAC 1000mA AC Adapter
This high quality AC adapter is useful for many applications. Right angle plug. In most applications, you can use an adapter with a higher capacity. However, always select an adapter with the same voltage.
Specifications: • Power output: 9 VAC, 1000 mA • Maximum power output: 9W • Input requirements: 120 VAC, 60 Hz • Plug tip size: 2.1 x 5.5 mm (right angle) • Cord length: 6 feet • UL listed.
Note: Output voltages are rated at full load. No load voltages can be up to 50% higher.


Product Specifications
  • AC Output Voltage9V
  • Current Capacity1000 mA
  • Center/Tip PolarityAC
  • Plug Size2.1 x 5.5 mm
  • Input Voltage110~120 VAC
9 VAC 1000mA AC Adapter
  • BrandParts Express
  • Part Number120-1030
  • UPC848864003672
  • Product CategoryAC/DC Power Adapters
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight0.653 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 9 VAC 1000mA AC Adapter
in the AC/DC Power Adapters product category.

Reviews

9 VAC 1000mA AC Adapter
9 VAC 1000mA AC Adapter is rated 4.6667 out of 5 by 9.
Rated 5 out of 5 by from great productall the big guitar effects and processors use this A/C power supply. I add some red electric tape to the wire, so I don't get it mixed up with my D/C power supplies.
Date published: 2013-09-02
Rated 4 out of 5 by from Works as power supply for ART X-15Needed a replacement power supply for an ART X-15 foot controller. Works fine. Wire is on the thin side and will probably get trashed gigging, like the last power supply.
Date published: 2012-01-08
Rated 5 out of 5 by from DID THE JOBI needed a VAC adaptor for an Art guitar and mic preamp. The voltage ratings were not exactly what was called for by unit. It was sufficent for the unit
Date published: 2010-03-24
Rated 4 out of 5 by from WorksBought to replace Black&Decker charger. Polarity correct but output connector wrong. Spliced on B&D connector. Tools charged quickly but unit seemed to run hot, with some distortion of case.
Date published: 2010-01-11
Rated 5 out of 5 by from 9 VAC 1000mA Ac Adapter for ART DJ Pre II PreampFor those with the ART DJ Pre II Preamp, this is the exact replacement. This is important if you need one because you otherwise would have to order one through a dealer (long delays). My adapter that came with my preamp lasted only a week before lots of noise started. The preamp is great, the adapter is not.
Date published: 2009-10-19
Rated 5 out of 5 by from 9 VAC 100mA AC AdapterThis unit does the job it is meant to very well. The excellent thing about buying it from Parts Express is that I was able to replace a damaged unit this way which was not available from the OEM.
Date published: 2009-06-09

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
9 VAC 1000mA AC Adapter

I NEED A 9V 850mA ADAPTER FOR MY WIRELESS VTECH TELEPHONE WILL 1000mA WORK? 

Asked by: JD64
Yes 1000 mA will work fine for that application.
Answered by: MattP
Date published: 2014-03-25

What is the polarity of the plug?

I need a 9V, 1000mA, Negative center pole plug for the equipment (a wireless speaker) I wish to attach this power supply to.
Asked by: Darkship
That sound unusual. Products like this are "standard" across all manufacturers for ease of building, selling and replacement parts. I would check with your manufacturer to make sure. Any off-the-shelf power supply should work.
Answered by: MarkAJH
Date published: 2012-08-05

Customer Projects

Customer projects that include: 9 VAC 1000mA AC Adapter

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

120-1030_ALT_3.jpg
Part # 120-1030
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1