Parts Express Free Shipping at 98 Dollars

9-Pin Tube Socket Belton Micalex Saddle Chassis Mount

9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount

Overview
Chassis mount 9-pin miniature Micalex (Belton) saddle mount tube socket. Chassis hole diameter: 3/4". Mounting centers: 1-1/8".
Part # 
055-552
Weight: 0.04 lbs.  
IN STOCK
Your Price
$3.35
Buy 10-up$3.00
Part # 055-552
Qty:  EA
Available Payment Methods

Product Details

9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount
Chassis mount 9-pin miniature Micalex (Belton) saddle mount tube socket. Chassis hole diameter: 3/4". Mounting centers: 1-1/8".


9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount
  • BrandParts Express
  • Part Number055-552
  • UPC844632063824
  • Product CategoryVacuum Tube Sockets & Retainers
  • Unit of MeasureEA
  • Product Rating
    (2 Reviews)
  • Weight0.04 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the 9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount
in the Vacuum Tube Sockets & Retainers product category.

Reviews

9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount
9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Replaced Sockets on Pro Jr.I ordered these to replace the sockets on a Pro Jr. The Pro Jr. and Blues Jr. cutouts in the chassis are 1-inch. That gives you very little to work with, but it can be done. I used #6 self tapping screws and there was barely enough room to get a screw hole. If you get these sockets and plan to use them on a Blues Jr. or Pro Jr. you might consider #4 self tapping screws to mount them.20 ga. AWG wire fits well into the socket lugs if you tin the leads carefully (or not at all).
Date published: 2012-11-25
Rated 5 out of 5 by from Excellent choice for replacement Sockets !Old amp sockets that went bad are a drag, tube heats up you see.. I ordered these 3/4" ones because the chassis punchouts were shy of 7/8". Be that as it may the bolt holes centered, the lug orientation matched! Tubes were a bit stiff going in, ahh just right. The lugs are nicely separated and easy to work with. 3 in, 1 to go.
Date published: 2011-02-17

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount

10 th hole

Does this socket come with a 10th hole in the center with a connection to it
Asked by: Butch
Unfortunately this model only has 9 holes to connect to.
Answered by: MattP
Date published: 2012-11-19

Customer Projects

Customer projects that include: 9-Pin Vacuum Tube Socket Belton Micalex Saddle Chassis Mount

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1