6V 250mA Fuse Type Lamp

6V 250mA Fuse Type Lamp

Indicator lamp, 3V & 6V, 250mA, fuse type. This fuse lamp was very popular back in the 70's and 80's. It was used by many of the vintage stereo receiver companies to back light tuner and control panel displays.
  • Works for both 3 Volt and 6 Volt styles
  • Popular in Vintage Stereo Equipment from the 70''s
  • Exact Replacement for Marantz Sansui and more...
Part # 
Weight: 0.0066 lbs.  
Due In: 2/3/2015
List Price$2.49
You Save61%
Your Price
Buy 10-99 $0.75
Buy 100-up$0.68
Part # 070-118
Qty:  EA
Available Payment Methods

Product Details

6V 250mA Fuse Type Lamp

Indicator lamp will replace both  3V and  6V,  250mA, fuse type lamps.  It was used by many of the vintage stereo receiver companies to back light tuner and control panel displays. This fuse lamp was very popular back in the 70's and 80's. Some of the manufacturers that used fuse lamps in their receivers and component systems include: Marantz, Sansui, Fisher, Jvc, Protron, Lafayette, Panasonic, McIntosh, Pioneer and many others.

6V 250mA Fuse Type Lamp
  • BrandParts Express
  • Part Number070-118
  • UPC844632036347
  • Product CategoryFuse Type Lamps
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight0.0066 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 6V 250mA Fuse Type Lamp
in the Fuse Type Lamps product category.


6V 250mA Fuse Type Lamp
6V 250mA Fuse Type Lamp is rated 4.7778 out of 5 by 9.
Rated 5 out of 5 by from Lighst working again.Been wanting to fix the lights on my receiver , now can see the channels .
Date published: 2014-09-13
Rated 5 out of 5 by from Matches original equipment perfectly!I used these to replace the original factory 6.3V lamps in a Sansui receiver I was overhauling. Great results!
Date published: 2014-03-02
Rated 5 out of 5 by from Great bulbs for vintage Onkyo TX-4500Though a bit out of spec at forst glance, I used these to replace all of the tuner and meter lights in a mint Onkyo TX-4500. These little inexpensive bulbs restored the beauty of that receiver as it is quite the looker when lit up. Thank you!
Date published: 2013-03-08
Rated 5 out of 5 by from Great Value, Great ProductI have looked all over for a replacement bulb of this type. No ware could they be found except at Parts Express. They worked perfectly in my vintage receiver. I am glad that I had ordered 4 of them, found another bulb hidden. I thought it odd that all the bulbs where blown, even the small bulb to indicate a stereo signal. Now all is good and the stereo receiver looks and works like new. Thank you Parts Express.
Date published: 2011-10-11
Rated 4 out of 5 by from Great replacement lamp.Bough these lamps to replace dial lights in a vintage stereo receiver(Sansui), worked like a charm, and saved money over retail cost.
Date published: 2009-10-31
Rated 4 out of 5 by from Hard to findThese lights are hard to find. If you are working with old equipment it is great to be able to get replacement parts. I was after 6.3 volt but the 6.0 are doing fine so far.
Date published: 2009-03-30

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
6V 250mA Fuse Type Lamp

looking for a bulb for the strobe in a dual 604 turntable - would this work

Asked by: Comer
This requires a bit more information in order to proceed. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2014-09-23

Is this bulb actually 6.3v?

Hi - I need to replace several 6.3v .25A fuse lamps in an old HK 430 stereo receiver. The picture for your "6V" lamp shows it stamped as "6.3V", so I'm wondering if it actually IS a 6.3V lamp? Or if not, if the 6V lamp will work properly as a replacement for a 6.3V lamp? Thanks.
Asked by: ckaye
This is indeed a 6.3 volt lamp.
Answered by: Chrisf
Date published: 2013-01-28

Colors coming?

Will there be different colors available in the (near) future? Blue, red, green, etc?
Asked by: JMahun
I am sorry, we do not carry these in other colors at this time but I will be happy to pass the idea along to our New Products department. Suggestions to broaden our product line are always welcome
Answered by: Chrisf
Date published: 2012-12-18

what are the dimensions of the fuse, in MM please.thank

Asked by: asech
This item is approximately 1-1/8" long, and 1/4" in diameter. This translates to roughly 28.6mm x 6.35mm.
Answered by: RussR
Date published: 2011-08-11

Customer Projects

Customer projects that include: 6V 250mA Fuse Type Lamp

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA

© 1996-2014 Parts Express, All Rights Reserved