6 AA Cell Battery Holder

Useful for replacing worn battery holders in portable radios and other electronics. Perfect for the electronic hobbyist and kit builder.
Part # 
Weight: 0.0462 lbs.  
Your Price
Buy 10-up$1.44
Part # 140-976
Qty:  EA
Available Payment Methods

Product Details

6 AA Cell Battery Holder
Useful for replacing worn battery holders in portable radios and other electronics. Perfect for the electronic hobbyist and kit builder. Requires 9V battery type snap clip, sold separately.

6 AA Cell Battery Holder
  • BrandParts Express
  • Part Number140-976
  • UPC038975373638
  • Product CategoryBattery Holders
  • Unit of MeasureEA
  • Product Rating
    (11 Reviews)
  • Weight0.0462 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 6 AA Cell Battery Holder
in the Battery Holders product category.


6 AA Cell Battery Holder
6 AA Cell Battery Holder is rated 4.9091 out of 5 by 11.
Rated 5 out of 5 by from Perfect ReplacementPerfect replacement part ..........................
Date published: 2014-12-23
Rated 5 out of 5 by from Perfect fit replacementThis was a perfect fit replacement for a corroded battery holder, not just for the batteries, but fit the compartment as well. Got my automount telescope up and running again. Best price I found. Service excellent, arrived quickly. Ordered two, and now I'll have a spare if I'm dumb enough to store the device too long with batteries in it again...
Date published: 2014-07-29
Rated 5 out of 5 by from It looked like what I was looking for.It was exactly what I was looking for. The price was the best I found. You can't beat that.
Date published: 2013-09-13
Rated 5 out of 5 by from Great findVery inexpensive item however , so hard to find the correct one. Super find at a fantastic price.
Date published: 2013-05-05
Rated 5 out of 5 by from aa battery holderI was very pleased to find the battery holders I needed at a reasonable price The service I received from this company was great I would recommend them to anybody I was very pleased with the product & the service
Date published: 2012-07-26
Rated 5 out of 5 by from Exactly what I neededInexpensive and exactly what I needed. Works fine. Using rechargeable batteries for a lantern with led lighting that I would have had to toss otherwise as there are no replacement batteries for it. Purchased this with the 9-volt battery clip (Part #: 090-805) and it works like a charm. I like the fact that the batteries are somewhat tight to get into the holder so I know they won't be falling out. The edges are curled so you need to put the side batteries in first and then the center battery last. Will probably order more.
Date published: 2012-04-30
  • 2015-05-04T07:26CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_140-976, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
6 AA Cell Battery Holder

Is this holder easily modified to allow 3AA in parallel with 3AA batteries?.

Is this holder easily modified to allow 3AA in parallel with 3AA batteries? I would like to have 4.5-Vdc and more Amp hours capacity than single AA batteries.
Asked by: joihnH
I suppose it could be modified for this although it has not been tried as far as I know. I could not say how easy or difficult this would be.
Answered by: MattP
Date published: 2013-05-29

Is a battery cover available?

I also want two cables with the 9v plug on one end, and a 2.1 x 5.5 reverse polarity right angle plug. One cable would be a foot long, the other cable 4 feet long. Can you provide that, or point me somewhere?
Asked by: mslinn
We do not carry a cover, per se, for this battery holder. We do carry a variety of project boxes that would do a good job of housing it, however. We don't carry the cables you're looking for specifically, nor do we do custom work, but we have everything you'd need to construct them yourself. I've linked some appropriate products below.
Answered by: RussR
Date published: 2012-07-05

What are the deminsions of this holder?

Asked by: newvisjr
This unit measures approximately 1-3/4" by 1-1/8" by 2-3/8" high (including the 9v snap-on tabs).
Answered by: RussR
Date published: 2012-05-05
  • 2015-05-04T09:45CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_140-976, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: 6 AA Cell Battery Holder

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software