5" Paper Dust Cap

5" Paper Speaker Dust Cap

Overview
Replace damaged or aging dust caps with these high grade units. They are available in four different sizes to accommodate 5-1/4" to 18" woofers. Your choice of either paper or polymer dust cap material.
Part # 
260-381
Weight: 0.0013 lbs.  
IN STOCK
Your Price
$1.50
Buy 10-99 $0.98
Buy 100-up$0.75
Part # 260-381
Qty:  EA
Available Payment Methods

Product Details

5" Paper Speaker Dust Cap
Replace damaged or aging dust caps with these high grade units. They are available in four different sizes to accommodate 5-1/4" to 18" woofers. Your choice of either paper or polymer dust cap material. Use speaker repair glue for paper cones or super glue gel for poly cones.


5" Paper Speaker Dust Cap
  • BrandParts Express
  • Part Number260-381
  • UPC844632013317
  • Product CategoryDust Caps
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight0.0013 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 5" Paper Speaker Dust Cap
in the Dust Caps product category.

Reviews

5" Paper Speaker Dust Cap
5" Paper Speaker Dust Cap is rated 4.875 out of 5 by 8.
Rated 5 out of 5 by from Good thing!Very worthy dust caps, are well put on 12" and 15" speakers with 4" the voice coil.
Date published: 2014-03-16
Rated 5 out of 5 by from Saved my BlackWidowThe cap was the perfect size to fix my speaker with. Saved my from buying a new basket & money. THANKS :-)
Date published: 2014-03-16
Rated 5 out of 5 by from Does it's job and does it well.These dust caps are fairly stiff and durable. There are cheaper ones out there but I've found them to be a little thinner. These have a good width flange to glue down and have consistent quality. Great for up sizing caps so you don't need to mess with a glue ridge from an old cap. Like one other reviewer I found these to be about a 1/4 inch to small for a pair of Pyle Drivers I re-foamed. Worked great for replacing damaged dust caps on a Pioneer 15" and a JBL 10".
Date published: 2014-03-16
Rated 5 out of 5 by from Perfect for JBL 2245sI used them in place of the (undersized) dust caps that came with the 2245 foam-surround kit (260-988), and they worked great. A bit larger than the original, so you don't have to deal with trying to glue a new dust cap onto the glue ridge left by the original. And the outer lip makes installation much easier, giving you a nice surface to apply glue to, instead of a sharp edge.
Date published: 2014-03-16
Rated 5 out of 5 by from Great Dustcap SolutionI was refoaming two pairs of 12" woofers with the 4" dust cap and I needed something bigger to cover up the old ones I had to cut out. These did the trick nicely. If anyone needs my services, feel free to e-mail me (Andrew) at (removed). Just put REFOAM in the subject line and I will get you a quote as soon as possible. Thanks!
Date published: 2014-03-16
Rated 5 out of 5 by from great productgreat product
Date published: 2014-03-16

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
5" Paper Speaker Dust Cap

Customer Projects

Customer projects that include: 5" Paper Speaker Dust Cap

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Parts Express Free Shipping at 98 Dollars

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1