Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
4.7uF 100V Electrolytic Non-Polarized Crossover Capacitor
I'm looking to replace the crossovers in a set of advent prodigy towers. They are very basic but contain a 13uf 50v and a 5uf 50v cap that is not available on this site. Would this 4.7uf work for the 5uf cap and if so what difference would it make?
Yes a 4.7 would work in place of a 5, the difference would be negligible at worst. You could also add two caps together that add up to the value you need, but it would not be very beneficial here.
Date published: 2015-03-10
do these cut out low or high sounds
In speaker cross-overs, capacitors generally cut the low frequencies to the tweeter letting the high frequencies pass. On the other hand, inductors cut the high frequencies to the woofer, letting the low frequencies pass.
Date published: 2013-09-07
What is the tolerance of the cap?
My old Spicas had 10% tolerance so it would be nice not to have to buy several to find matches that are within 10% of the specified value.
This product features a 10% tolerance rating.
Date published: 2012-03-31