4-8 AWG Distribution Block

Solid brass block with connections for (1) 4 ga. wire input from battery and (4) 8 ga. wire outputs for power to the amplifiers. Recessed set screws hold the wire in place.
Part # 
Weight: 0.4026 lbs.  
List Price$9.99
You Save40%
Your Price
Buy 4-up$5.45
Part # 265-800
Qty:  EA
Available Payment Methods

Product Details

4-8 AWG Distribution Block

Solid brass block with connections for (1) 4 ga. wire input from battery and (4) 8 ga. wire outputs for power to the amplifiers. Recessed set screws hold the wire in place. Brass block is completely insulated with clear plastic to prevent accidental shorting.

4-8 AWG Distribution Block
  • BrandParts Express
  • Part Number265-800
  • UPC844632017308
  • Product CategoryPower Distribution Hardware
  • Unit of MeasureEA
  • Product Rating
    (9 Reviews)
  • Weight0.4026 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 4-8 AWG Distribution Block
in the Power Distribution Hardware product category.


4-8 AWG Distribution Block
4-8 AWG Distribution Block is rated 4.5556 out of 5 by 9.
Rated 5 out of 5 by from Great product!The block is nicely built - solid and smooth finish. The plastic cover is also nicely made - snap in and remove easy yet not loose. One little issue to mention is that one of the 8AWG set screws was a bit tight. This didn't happen on the 2nd one purchased though.
Date published: 2015-02-03
Rated 5 out of 5 by from Solid qualityIts just a block so there's not much to it, but it is well made. The plastic parts are heavy duty and fit well together and the brass block is smooth and highly polished. Looks like its gold plated, not sure if it is but it looks nice.
Date published: 2013-08-02
Rated 5 out of 5 by from better than Radio Shack!Radio Shack used to sell a very similar product but no longer does. This one is built a little more cleverly (better mounting options), is much less expensive (less than 1/2), and works great for me.
Date published: 2011-08-21
Rated 5 out of 5 by from clean and high qualityI love these dist. blocks. They have a much cleaner look than some of the other flashy blocks.
Date published: 2009-10-14
Rated 4 out of 5 by from Great Value.Great connecting block, but if trunk mounting, or using it were tools or other free objects might come in contact with it be carefull. On a meticulous install this is not an issue. The area were the cable sleve enters the 4 guage input, could be bigger. All in all great device.
Date published: 2009-01-21
Rated 4 out of 5 by from Good value and product.4 awg in seems more like 2 or 0 awg in. Had to tin 4 awg wire to get good connection. Was able to insert 2 - 10 awg wires in each 8 awg hole.
Date published: 2008-04-23
  • 2015-05-25T07:17CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_265-800, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
4-8 AWG Distribution Block

Customer Projects

Customer projects that include: 4-8 AWG Distribution Block

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions

If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.

Recently Viewed Products

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA

© 1996-2015 Parts Express, All Rights Reserved

Live Chat Software