Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
3.5mm Stereo Panel Mount Jack
What is the thread size?
The thread size is not a spec we have, but based on a very rough measurement with a thread gauge, the threads appear to be 0.5mm from peak to peak with an outside diameter of 5.5mm.
Date published: 2014-10-07
Is this a "switched" jack?
This is not a switched jack.
Date published: 2014-09-15
I assume the flat silver connection on top is ground for both left and right, and the other two at for positive left and right wires.....
The long prong is ground/sleeve, the number 1 prong (silver) is for tip, and the number 2 prong (gold) is for ring.
Date published: 2014-04-24
What is the minimum and maximum mounting surface thickness?
The threaded shaft is approximately 3/16" long so this will ideally mount to a surface that is 1/8" or thinner.
Date published: 2013-07-11
What are the dimensions of this stereo receptacle?
Total body length including threads is 5/8", total length including threads and terminals is 27/32", thread length is 3/16", thread diameter (mounting hole) is 1/4", body diameter is 5/16".
Date published: 2013-03-20
Wiring to head phone drivers?
Can you wire multiple headphone drivers to this using the standard + to + - to - for parallel and + to - to + to -
This item is simply a connector to transfer signal from one kind of plug (3.5mm stereo) to any other device. One could certainly utilize it for delivering signal to headphone drivers, whether they be wired parallel, series, or otherwise.
Date published: 2012-04-21