3.3uF 100V Non-Polarized Capacitor

3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor

Overview
These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 10% dissipation factor and are rated at 100V which are effective to approximately 200 watts.
Highlights
  • 3.3 microfarad value
  • 10 mm diameter x 19 mm long
  • 10% dissipation factor and 100 VDC working voltage
Part # 
027-328
Weight: 0.002 lbs.  
IN STOCK
Your Price
$0.50
Buy 10-99 $0.39
Buy 100-999 $0.32
Buy 1000-up$0.25
Part # 027-328
Qty:  EA
Available Payment Methods

Product Details

3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor

Electrolytic non-polarized (bi-polar) capacitors are perfect low-cost solutions for use in passive speaker crossovers. These capacitors feature axial leads, a 10% dissipation factor, and are rated at a 100 VDC working voltage which equates to approximately 200 watts power handling. Sold individually. 

Specifications: • Rated: 100 VDC • Tolerance: 10% • Value: 3.3 uF • Dimensions: 10 mm Dia. x 19 mm L • Power handling: 200 watts RMS.



Product Specifications
  • Capacitance3.3 µF
  • Voltage Rating100V
  • Tolerance10%
  • Termination StyleAxial
3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor
  • BrandParts Express
  • Part Number027-328
  • UPC844632018121
  • Product CategoryNon-Polarized Electrolytic Capacitors
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.002 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor
in the Non-Polarized Electrolytic Capacitors product category.

Reviews

3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor
3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor is rated 4.6667 out of 5 by 6.
Rated 5 out of 5 by from Cross over repair on vintage speakers goes smoothly with this capacitorWhat can I say... Parts express saves the day.. installed this part on my existing 2 way cross over for sound dynamics speakers and ...wow...tweeter works once again...just like new. No parts store in my area stocks these vital items..Speedy delivery too.Thanks Parts Express!!!!!!!!!
Date published: 2013-10-25
Rated 5 out of 5 by from Excellent!Works just as it should. Used as part of my bi-amp cab crossovers. easy to solder to as well.
Date published: 2013-05-13
Rated 5 out of 5 by from Great Find for my problemafter much searching for a capacitor similar to this one,(without much luck),I was directed to your site by ASK THE EXPERT. WHat a great find, you solved my problem.I will recomend you to others having a problem like I had.
Date published: 2009-07-18
Rated 4 out of 5 by from 3.3 uF Cap 100vI wanted a little more sizzle in my Bullet Tweeters.These did the the job, low distortion even at high volume.
Date published: 2008-10-20
Rated 4 out of 5 by from Well-made, high qualityBetter than the (small) versions sold by most other vendors. No problems.
Date published: 2008-04-08
Rated 5 out of 5 by from performed flawlesslyi purchased this to replace some blown capacitors in a couple of crossovers, i just soldiered them in and they worked perfectly. sound great too
Date published: 2007-10-28

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor

hi

does this cut off low enough for a midrange?
Asked by: speaker freack
This will cross an 8 ohm driver at about 6,000-7,000 Hz and a 4 ohm at about 12,000-14,000 Hz.
Answered by: MattP
Date published: 2013-09-19

What is the size?

Asked by: Ralph A Roni
If you're referring to the physical size of the capacitor itself, it's about 3/4" long and 5/8" in diameter.
Answered by: KC Jayhawk
Date published: 2012-03-14

Customer Projects

Customer projects that include: 3.3uF 100V Electrolytic Non-Polarized Crossover Capacitor

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software