3-Segment LED 12" Flexible Gooseneck Mixing Console Lamp with Locking BNC
3-Segment LED 12" Flexible Gooseneck Mixing Console Lamp with Locking BNC is rated out of 5 by 3.
Rated 4 out of 5
from Works great for usWe have a Soundcraft Expression SI1 digital mixer which states a maximum of 100 ma current for the BNC light. That rules out incandescent and many LED lamps use more current than 100 ma. The description of this lamp states 60 ma. We would prefer slightly longer than 12" gooseneck but decided to try. It does work great though the BNC connector is different than expected. It slides on without locking and I had to slide it on a few times before it made contact and the light came on. The light is bright and very white. It covers our entire mixer surface which is approx 19" square. Would be nice if it were longer so we could angle the light away from the front of the mixer as it is bright and can get in your eye just a little bit if you are sitting with eye level just above the mixer surface.I am very happy with this light, nothing at near the price and few if any others that draw less than 100 ma. FYI I did measure the actual current draw at 52 ma at 12v dc.
Date published: 2015-02-22
Rated 5 out of 5
from Very good mixer lite.I wanted to try this out on my guitar effects pedal set-up, to provide light on my pedals that are attached to a Pedal Train board. This product works very well. Attaches tight to the BNC connector. Even tho this lite has 3 LEDs, it is not quite as bright as a similar product made by Littlite. But it works great, attaches perfectly, and provides a soft LED light.
Date published: 2015-01-06
Rated 5 out of 5
from Great light.I love the way the collar screws down onto the mixer connector rather than just 'twist-lock' and the light is a pleasing intensity of white.
Date published: 2014-12-19