free shipping at parts express

22uF 100V Electrolytic Non-Polarized Crossover Capacitor

Brand:|Part # 027-348
These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 5% dissipation factor and are rated at 100V which are effective to approximately 200 watts.
In Stock
Your Price
Buy 10-99 $0.69
Buy 100-999 $0.55
Buy 1000+$0.39
Part # 027-348
  • 22 microfarad value
  • 13 mm diameter x 27 mm long
  • 5% dissipation factor and 100 VDC working voltage
  • ±10% tolerance

Product Details

22uF 100V Electrolytic Non-Polarized Crossover Capacitor

Electrolytic non-polarized (bi-polar) capacitors are perfect low-cost solutions for use in passive speaker crossovers. These capacitors feature axial leads, a 5% dissipation factor, and are rated at a 100 VDC working voltage which equates to approximately 200 watts power handling. Sold individually. 

Specifications: • Rated: 100 VDC • Tolerance: 10% • Value: 22.0 uF • Dimensions: 13 mm Dia. x 27 mm L • Power handling: 200 watts RMS.

Product Specifications
  • Capacitance22 µF
  • Voltage Rating100V
  • Tolerance10%
  • Termination StyleAxial
22uF 100V Electrolytic Non-Polarized Crossover Capacitor
  • BrandParts Express
  • Part Number027-348
  • UPC844632018220
  • Product CategoryNon-Polarized Electrolytic Capacitors
  • Unit of MeasureEA
  • Product Rating
    (3 Reviews)
  • Weight0.002 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the 22uF 100V Electrolytic Non-Polarized Crossover Capacitor
in the Non-Polarized Electrolytic Capacitors product category.


22uF 100V Electrolytic Non-Polarized Crossover Capacitor
22uF 100V Electrolytic Non-Polarized Crossover Capacitor is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Great productGreat product with fast shipping. Parts express usually has what I need and it doesn't take long to get it.
Date published: 2014-03-05
Rated 5 out of 5 by from Cheap, compact, and "sounds" greatI used this cap in rebuilding a cross-over for the vintage Boston Acoustics A-150 speakers. Worked like a charm. They are very compact, which was nice working with the Bostons since their cross-overs are very busy. Capacitance and ESR were well within spec. My rebuilt Bostons sound great! Highly recommended.
Date published: 2013-08-09
Rated 5 out of 5 by from Perfect!I used this on my Vifa TC9FD-18-08 3-1/2" Full Range Paper Cone Woofer's that I use as midrange speakers. The speakers, by the way, are awesome for such a small speaker. But, I needed to cut the low end. I didn't want them trying to do the job of my woofer, they just can't handle higher wattage for low freq's. These caps did the trick. I still get ~900 Hz out of them but the deeper lows are blocked.
Date published: 2013-04-09
  • 2016-02-13T07:21CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_027-348, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
22uF 100V Electrolytic Non-Polarized Crossover Capacitor

What is the capacitance tolerance of your non-polarized electros? In specific, p/n 027-348.

Asked by: Pete M.
All of the electrolytic caps have a 10% tolerance.
Answered by: MattP
Date published: 2013-03-19

Dimensions/Size, Technical

1. What are the dimensions of this capactior?2. Length/Diameter of the cap, lengths of leads?3. I am replacing the original 20uf cap with this 22uf, will this cause a problem and what, if any, sound output difference will it make in my speaker? This is a 3way xover.Thanks
Asked by: Noodle
8 ohm system: 22uF cap will give you 903.4 Hz and 20uF cap will give you 993.7 Hz.4 ohm system: 22uF cap will give you 1806.8 Hz and 20uF cap will give you 1987.5 Hz. A little overlap is good, so you should be fine and happy with this value.
Answered by: Big Mike
Date published: 2014-08-17
  • 2016-02-13T08:05CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_027-348, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software