220uF 100V Non-Polarized Capacitor

220uF 100V Electrolytic Non-Polarized Crossover Capacitor

Overview
These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 10% dissipation factor and are rated at 100V which are effective to approximately 200 watts.
Highlights
  • 220 microfarad value
  • 18 mm diameter x 44 mm long
  • 10% dissipation factor and 100 VDC working voltage
Part # 
027-368
Weight: 0.037 lbs.  
IN STOCK
Your Price
$3.28
Buy 10-99 $2.78
Buy 100-999 $2.29
Buy 1000-up$1.98
Part # 027-368
Qty:  EA
Available Payment Methods

Product Details

220uF 100V Electrolytic Non-Polarized Crossover Capacitor

Electrolytic non-polarized (bi-polar) capacitors are perfect low-cost solutions for use in passive speaker crossovers. These capacitors feature axial leads, a 10% dissipation factor, and are rated at a 100 VDC working voltage which equates to approximately 200 watts power handling. Sold individually. 

Specifications: • Rated: 100 VDC • Tolerance: 10% • Value: 220.0 uF • Dimensions: 18 mm Dia. x 44 mm L • Power handling: 200 watts RMS.



Product Specifications
  • Capacitance220 µF
  • Voltage Rating100V
  • Tolerance10%
  • Termination StyleAxial
220uF 100V Electrolytic Non-Polarized Crossover Capacitor
  • BrandParts Express
  • Part Number027-368
  • UPC844632018312
  • Product CategoryNon-Polarized Electrolytic Capacitors
  • Unit of MeasureEA
  • Weight0.037 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 220uF 100V Electrolytic Non-Polarized Crossover Capacitor
in the Non-Polarized Electrolytic Capacitors product category.

Reviews

220uF 100V Electrolytic Non-Polarized Crossover Capacitor
220uF 100V Electrolytic Non-Polarized Crossover Capacitor is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Good crossover upgrade.I used these to replace crossover caps in a Finalsound 0.3 ESL that were in use for 12 years. Non-polar caps are hard to find and Parts Express has a good selection of audiophile-grade caps.
Date published: 2012-05-21

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
220uF 100V Electrolytic Non-Polarized Crossover Capacitor

Is the power rating higher when used at 4 Ohm?

Asked by: Pinecone
Unfortunately no, this will handle 100 volts regardless of impedance.
Answered by: MattP
Date published: 2013-05-30

Where would these crossover a 4 Ohm system?

I'm planning on using these to block the bass to the factory speakers in a car when adding a 12" sub. One on each front speaker and two in parallel for each rear speaker. I'm guessing that 180hz for the front and 90hz for the rear. Am I close?
Asked by: Pinecone
This value would provide a crossover frequency of about 250 Hz and 125 Hz respectively.
Answered by: MattP
Date published: 2013-05-30

Customer Projects

Customer projects that include: 220uF 100V Electrolytic Non-Polarized Crossover Capacitor

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Parts Express Free Shipping at 98 Dollars

Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH45066USA
800-338-0531

© 1996-2014 Parts Express, All Rights Reserved

Host-Name:ZNODE1