Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email email@example.com
for a prompt reply.
2" Paper Cone Tweeter 4 Ohm
I'd like to use this tweeter with a 6 1/2" inch woofer (Part # 299-609). What capacitors will I need for that?
I would recommend a 3.3 or 4 uF cap for the tweeter in this application. You wouldn't necessarily have to low pass the woofer, but a 0.25 mH inductor will help cut down on any midrange beaming and help with baffle step.
Date published: 2014-10-15
Capacitor for 1000hz and up?
I will be adding these with some 6 1\2 inch woofers. Can i tune this down to 1000hz without damaging the driver? or should i go with 2000Hz or so? What cap should I use?
With a free air resonance of over 4kHz I would not recommend crossing this any lower than about 8kHz with only a capacitor.
Date published: 2013-10-15
What Capacitor should i use for 4000hz and up?
I am using this in with my 4" mid-bass driver, i want all most frequencies above 3000-4000Hz. Thanks.
I would recommend a 10 uF capacitor for 4kHz and up.
Date published: 2014-04-24
what is the diagonal hole spacing on this tweeter? thanks
Center-to-center, the mounting hole spacing is approximately 3-7/8" diagonally.
Date published: 2014-02-26