free shipping at parts express

12 VDC 2000mA Switching Power Supply US and EU 2.1mm plug

Brand:|Part # 120-052
This RoHS compliant, regulated switching power supply delivers up to 24 watts of power using either US standard 60 Hz, 110/120 VAC or European standard 50 Hz, 220/240 VAC. Snap-in power plugs for both US and European outlets are included. 6 ft. connection cable with 2.1 mm x 5.5 mm plug.
In Stock
List Price$19.99
You Save21%
Your Price
$15.85
Buy 4-19 $13.75
Buy 20+$12.98
Part # 120-052
Share:

Product Details

12 VDC 2000mA Switching Power Supply US and EU 2.1mm plug
This RoHS compliant, regulated switching power supply delivers up to 24 watts of power using either US standard 60 Hz, 110/120 VAC or European standard 50 Hz, 220/240 VAC. Snap-in power plugs for both US and European outlets are included. 6 ft. connection cable with 2.1 mm x 5.5 mm plug.


Product Specifications
  • DC Output Voltage12V
  • Current Capacity2000 mA
  • Center/Tip PolarityCenter (+)
  • Plug Size2.1 x 5.5 mm
  • Input Voltage100~240 VAC
12 VDC 2000mA Switching Power Supply US and EU 2.1mm plug
  • BrandParts Express
  • Part Number120-052
  • UPC844632074806
  • Product CategoryAC/DC Power Adapters
  • Unit of MeasureEA
  • Product Rating
    (6 Reviews)
  • Weight0.378 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Reviews

12 VDC 2000mA Switching Power Supply US and EU 2.1mm plug
12 VDC 2000mA Switching Power Supply US and EU 2.1mm plug is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Dependable.I've bought many of these over time and they never fail. I do wish they were a little smaller as sometimes I fit them into tight spaces, but they are workhorses and I haven't had one fail yet.
Date published: 2015-03-11
Rated 5 out of 5 by from Something that actually does what it claims.I needed a 12 vdc power supply @ about 500ma. The ones I purchased at Parts X floated in and about 20 volts. The load I was applying could not bring it down to 12v. I was not going to now start with voltage regulation. I got the Parts X 2000ma unit. Lo and behold! - 12volts on the nail
Date published: 2014-10-28
Rated 5 out of 5 by from Powers my amp great.I bought this to power a small amp for a radio project. Works great.
Date published: 2014-09-23
Rated 5 out of 5 by from Works as expectedNothing to mention. It works as expected. No issues.
Date published: 2014-09-09
Rated 5 out of 5 by from Missing PartsI purchased this power supply to replace one that vanished into mid-air.The unit it powers is working great, and I will in due time be replacing more ofmy older adapters.
Date published: 2014-07-12
Rated 5 out of 5 by from 12v 2 amp power supplyNice little compact power supply i use this with my Lepai Bantam mini amp.
Date published: 2013-03-27
  • 2016-02-12T06:29CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_120-052, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
12 VDC 2000mA Switching Power Supply US and EU 2.1mm plug

Will this fit a neat desk scanner?

Asked by: Renee W
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2016-01-14

I'm trying to replace a Hon-Kwang HK-AX-120A200-US used to power a external hard drive (Oyen MiniPro RAID V2).  The output on the Hon-Kwang is 12V and 2A. Do you know if this power supply will work for me?

Asked by: edgifford
We do not have a cross reference available for this type of thing. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-12-09

Hi . I have a Carepeutic rolling turbo foot massager and need a replacement for the AC adptr . The plug says on the back. Switching power supply: input 100-240V AC50/60Hz . Output 12V 2.5 mA. On the wire itself it says 80 Degrees C. can I use this?

Asked by: lynn51
Some of these numbers don't really add up. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-09-18

can this be used for a Terk am/fm antenna tower.some one gave specs,120vac/12vdc thanks.

Asked by: garyf
This requires a bit more information in order to proceed. Please contact our tech support for more help with this question, tech@parts-express.com or 800-338-0531 x1.
Answered by: MattP
Date published: 2015-04-21

Will this work with a peavey solo amp that uses. 120 volt Ac input 12 volt do output at 2 amps

Asked by: BobbyR
This is indeed 12 volt DC and 2 amp. Just doublecheck the polarity and the connector size to make sure.
Answered by: Chrisf
Date published: 2015-04-05

I bought a couple of these along with some DTA-2 amp boards and panel mount DC jacks (item 090-479) but the center pin in the jack seems too big for this adapter. Does PE stock the correct panel mount jack? Thanks

Asked by: lowpolyjoe
Yes, you will need the 2.1mm panel mount jacks to work with that adapter. You can see them below.http://www.parts-express.com/parts-express-21mm-panel-mount-dc-jack--090-488
Answered by: MattP
Date published: 2014-11-06
  • 2016-02-12T07:13CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_120-052, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Host-Name:ZNODE1
Live Chat Software