10uF 100V Non-Polarized Capacitor

10uF 100V Electrolytic Non-Polarized Crossover Capacitor

Overview
These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 10% dissipation factor and are rated at 100V which are effective to approximately 200 watts.
Highlights
  • 10 microfarad value
  • 10 mm diameter x 24 mm long
  • 10% dissipation factor and 100 VDC working voltage
Part # 
027-340
Weight: 0.0200 lbs.  
IN STOCK
List Price$0.99
You Save32%
Your Price
$0.67
Buy 10-99 $0.48
Buy 100-999 $0.39
Buy 1000-up$0.29
Part # 027-340
Qty:  EA
Available Payment Methods

Product Details

10uF 100V Electrolytic Non-Polarized Crossover Capacitor

Electrolytic non-polarized (bi-polar) capacitors are perfect low-cost solutions for use in passive speaker crossovers. These capacitors feature axial leads, a 10% dissipation factor, and are rated at a 100 VDC working voltage which equates to approximately 200 watts power handling. Sold individually. 

Specifications: • Rated: 100 VDC • Tolerance: 10% • Value: 10.0 uF • Dimensions: 10 mm Dia. x 24 mm L • Power handling: 200 watts RMS.



Product Specifications
  • Capacitance10 µF
  • Voltage Rating100V
  • Tolerance10%
  • Termination StyleAxial
10uF 100V Electrolytic Non-Polarized Crossover Capacitor
  • BrandParts Express
  • Part Number027-340
  • UPC844632018183
  • Product CategoryNon-Polarized Electrolytic Capacitors
  • Unit of MeasureEA
  • Product Rating
    (11 Reviews)
  • Weight0.0200 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

View similar products to the 10uF 100V Electrolytic Non-Polarized Crossover Capacitor
in the Non-Polarized Electrolytic Capacitors product category.

Reviews

10uF 100V Electrolytic Non-Polarized Crossover Capacitor
10uF 100V Electrolytic Non-Polarized Crossover Capacitor is rated 4.8182 out of 5 by 11.
Rated 5 out of 5 by from For crossovers!So far they have worked great, for rebuilding speaker crossovers.
Date published: 2014-05-04
Rated 5 out of 5 by from Great capacitors at a great priceDelivered on time and parts were as described. worked great in crossover to replace old ones.
Date published: 2014-03-16
Rated 5 out of 5 by from Crossover rebuildHelped bring speaker crossover back to life, made my speakers sing!
Date published: 2014-03-11
Rated 5 out of 5 by from better results than expectedreplaced crossover capicators in my EPI-50 speakers. They now sound as good as when they were new.
Date published: 2014-01-22
Rated 5 out of 5 by from Great!Works just as it should. Used as part of my bi-amp cab crossovers. easy to solder to as well.
Date published: 2013-05-13
Rated 5 out of 5 by from Quality CapacitorI purchase many capacitors for replacing my KEF 103.2 crossover parts. I uses capacitor tester and ESR meter checked. The capacitance is very close the nominal 10 uf. The measure value is 10.4 uf The ESR value is 0.03 OHM. Compare with the original crossover capacitor measured 10.6 uf ESR 0.03 OHM from Name Brand (ALCAP)England made. This is compatible. It is amazing, the 28 years old ALCAP is still keep the original value. I hope the Parts Express one could do the same.
Date published: 2013-02-28
  • 2015-02-25T08:06CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_027-340, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email tech@parts-expresss.com  for a prompt reply.
10uF 100V Electrolytic Non-Polarized Crossover Capacitor

I have a Altec cross over. My tec states it has AC electrolytic caps?? 2UF/50 volts etc can you use any cap  of same rating? Thanks Mike

Asked by: turtle ultra

Hi there, I'm trying to find replacement caps for my infinity Qe speakers and didn't know if these 10uf would work. I didn't know what the 9.5 on these old ones means. The old cap reads exactly this: electro-cap 9.5/100v F600B-955K

Asked by: dANGERbOY
The numbers on the old cap represent the value and voltage, so this electrolytic cap will work fine as a replacement.
Answered by: MattP
Date published: 2014-02-07

Dimension/Size

What are the dimensions of this capactior?Length/Diameter of the cap, lengths of leads?Thanks
Asked by: Noodle
31/32" long, 13/16" diameter, 1-11/16" long leads.
Answered by: mtg90
Date published: 2012-04-18

What is the temperature rating on this? I am looking for 105c

Asked by: Gman1965
40c to 85c, and they work very well...i am extremely pleased with the performance of this line of caps!
Answered by: bigmike
Date published: 2012-04-05
  • 2015-02-25T09:24CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_027-340, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Customer Projects

Customer projects that include: 10uF 100V Electrolytic Non-Polarized Crossover Capacitor

If you built a project using this product, post it in the Parts Express Project Gallery.

Customer Discussions


If you would like to start a discussion about this product, post a thread in the TechTalk Customer Forum.
Get Deals
emailed to you every week.

Be the first to hear about new and exciting products,special pricing and incredible deals!

See This Week's "GET DEALS" Email
Parts Express
725 Pleasant Valley Dr.Springboro,OH 45066USA
800-338-0531

© 1996-2015 Parts Express, All Rights Reserved

Host-Name:ZNODE1
Live Chat Software