free shipping at parts express

100uF 100V Electrolytic Non-Polarized Crossover Capacitor

Brand:|Part # 027-360
These high quality bi-polar (non-polarized) electrolytic capacitors are perfect for your next crossover design. They feature a 5% dissipation factor and are rated at 100V which are effective to approximately 200 watts.
In Stock
Your Price
Buy 10-99 $1.25
Buy 100-999 $1.15
Buy 1000+$0.98
Part # 027-360
  • 100 microfarad value
  • 18 mm diameter x 38 mm long
  • 5% dissipation factor and 100 VDC working voltage
  • ±10% tolerance

Product Details

100uF 100V Electrolytic Non-Polarized Crossover Capacitor

Electrolytic non-polarized (bi-polar) capacitors are perfect low-cost solutions for use in passive speaker crossovers. These capacitors feature axial leads, a 5% dissipation factor, and are rated at a 100 VDC working voltage which equates to approximately 200 watts power handling. Sold individually. 

Specifications: • Rated: 100 VDC • Tolerance: 10% • Value: 100.0 uF • Dimensions: 18 mm Dia. x 38 mm L • Power handling: 200 watts RMS.

Product Specifications
  • Capacitance100 µF
  • Voltage Rating100V
  • Tolerance10%
  • Termination StyleAxial
100uF 100V Electrolytic Non-Polarized Crossover Capacitor
  • BrandParts Express
  • Part Number027-360
  • UPC844632018275
  • Product CategoryNon-Polarized Electrolytic Capacitors
  • Unit of MeasureEA
  • Product Rating
    (8 Reviews)
  • Weight0.002 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

View similar products to the 100uF 100V Electrolytic Non-Polarized Crossover Capacitor
in the Non-Polarized Electrolytic Capacitors product category.


100uF 100V Electrolytic Non-Polarized Crossover Capacitor
100uF 100V Electrolytic Non-Polarized Crossover Capacitor is rated 4.75 out of 5 by 8.
Rated 5 out of 5 by from Quality PartNeeded some large caps for the woofer section of a crossover in my latest project. At these large values, using multiple poly caps is far from cost friendly and takes up a huge amount of space. These bipolar caps fit the bill when building a crossover that is below 200hz.Although 10% tolerance rating, the two caps I received were within 4% of the stated rating.. Although that might have been luck. These caps have nice long leads too.
Date published: 2016-01-30
Rated 5 out of 5 by from Perfect for my applicationI have a set of 3.5" dash speakers that I installed in my car, in order to bring the soundstage up from the doors. While it worked, the tiny little things just couldnt handle the volume levels due to not being ablet o handle bass. Enter, these little guys. At the 100uf value, I was able to cut them off at 400hz and now my speakers sing, and at impressive levels.
Date published: 2013-06-27
Rated 5 out of 5 by from so far so goodpackage came on time customer service was great, the products are biiger than i thought but nothing to frown about they work just fine.
Date published: 2012-07-30
Rated 5 out of 5 by from Great CapacitorUsed on 2.5" midranges to block frequencies below 400 Hz at 4 ohm. Great Cap.
Date published: 2012-04-16
Rated 4 out of 5 by from Good Customer ServiceYour website is well laid out, your updates are prompt, you shipped the item quickly and it was the correct item and correct quantity.If only the rest of the world could follow your example.Good work!
Date published: 2009-01-20
Rated 5 out of 5 by from Good value and performance.I replaced my vintage C.V. low pass electrolyticcapacitors , which deteriorate over time, with these new (same type) replacements. The wooferaudio charateristics have been restored to there original performance.
Date published: 2008-12-27
  • 2016-02-10T07:17CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_8
  • loc_en_US, sid_027-360, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
100uF 100V Electrolytic Non-Polarized Crossover Capacitor

What is the tolerance on these 100V non polarized caps? +/-10% ???

Asked by: Steko
Yes these are rated for a 10% tolerance.
Answered by: MattP
Date published: 2013-04-13
  • 2016-02-10T08:06CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_027-360, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software