free shipping at parts express

Manuals & Resources

10" Bar Grill Black

Brand:|Model: BAR10/BLACK|Part # 260-441
Attractive bar style speaker grills will make a dramatic addition to your subwoofer or speaker system. The unique heavy-duty bar design protects your speakers from large impacts while the sleek, open design will not vibrate or cause chuffing sounds.
In Stock
List Price$12.99
You Save31%
Your Price
Buy 4+$8.25
Part # 260-441
  • Fits any 10" speaker
  • Attractive matte black finish
  • Includes mounting hardware
  • Provides 1.75" of clearance for high excursion woofers

Product Details

10" Bar Grill Black

Attractive bar style speaker grills will make a dramatic addition to your subwoofer or speaker system. The unique heavy-duty bar design protects your speakers from large impacts while the sleek, open design will not vibrate or cause chuffing sounds. The raised construction allows even the highest-excursion woofer to move its full stroke without interference. Can be used in conjunction with the two-piece or standard speaker grills for even more protection. Great for automotive installations or for protection in extreme pro-sound venues. Sold individually.

Dimensions: Inside Diameter: 11.5" • Outside Diameter: 12.25" • Woofer clearance (height from mounting surface to bottom of bar): 1.75"

10" Bar Grill Black
  • BrandGoldwood
  • ModelBAR10/BLACK
  • Part Number260-441
  • UPC643420720105
  • Product CategorySpeaker Grills
  • Unit of MeasureEA
  • Product Rating
    (17 Reviews)
  • Weight1.5 lbs.
  • California Prop 65

    Warning: California residents only. Please note per Proposition 65 that this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Similar Products

10" Bar Grill Chrome
Part #  260-440
12" Bar Grill Chrome
Part #  260-442
12" Bar Grill Black
Part #  260-443
15" Bar Grill Chrome
Part #  260-444
View similar products to the 10" Bar Grill Black
in the Speaker Grills product category.


10" Bar Grill Black
10" Bar Grill Black is rated 3.7647 out of 5 by 17.
Rated 5 out of 5 by from Perfect for trunk applications.Picked this up to protect the subwoofer in my trunk as well as give a little air space. This has held up to the wife's suitcase, cases of beer, even a propane tank rolling around. Great product!
Date published: 2015-08-08
Rated 5 out of 5 by from Very solid and looks great!This is a must have if you have subs in your trunk. Seems very solid and I doubt it could be dented. Looks much better than the waffle style grills imo.
Date published: 2015-04-22
Rated 2 out of 5 by from Missing hardware, fouled threads, OK when fixed.Received this Wednesday, with no hardware. Sent an email to Customer Service, who promptly apologized, addressed me by the wrong name, and sent me the packet of screws, which I received today (Friday). Half of the holes in the rods were fouled with the coating, and all of the countersunk holes in the brackets were undersized slightly (again due to the coating). Knocked those out with a drill bit, spent an hour at Menards trying to find a 4mm x .70 Metric tap, came home a few bucks lighter, chased the threads in every hole, and put it together. At this point, I've waited 4 days, spent 2 hours and a total of 25 bucks on it, but it looks good, is decently sturdy, and when assembled, laid flat with no warping or twist at all. Installation was obviously easy, since it's just 4 screws into MDF.I'd rather pay more to not be bothered fixing brand new parts. I'm cheap, but not that cheap.
Date published: 2015-03-28
Rated 4 out of 5 by from Solid grill coverI read a lot of the other reviews, and I don't know what everyone's been complaining about. It went together easily with no trouble at all and allows sufficient space for the highest excursion woofers to move.
Date published: 2013-03-24
Rated 5 out of 5 by from tightnice piece of hardware, slick and sexy also protects
Date published: 2011-01-13
Rated 4 out of 5 by from Nice grillPerhaps the have been some defects others have been complaining about, but my grill went together with no problem at all and looks great...its a very nice product, and I kind of wish I sold it at my shop...
Date published: 2010-08-23
  • 2016-02-13T06:50CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_US, sid_260-441, PRD, sort_mostRecent
  • clientName_PartsExpressInternational

Product Q&A

Get your questions answered from other customers
who own this product or have experience with it.
If your question requires design or troubleshooting information,
please email  for a prompt reply.
10" Bar Grill Black

I am thinking I would like to route a groove to mount this in, essentially flush mount the grill.  What is the outer diameter of the grill and how thick of a groove would be required?

Asked by: a2x024
The OD of the grill is 12-3/8", ID is 11-1/2" and the depth of the recess would be 1/8". There are slight tolerances involved, I would recommend waiting until you have your grills to get accurate measurements.
Answered by: MattP
Date published: 2013-11-20
  • 2016-02-13T07:40CST
  • bvseo_cps, prod_bvqa, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_260-441, PRD, sort_recentQuestionsFirst
  • clientName_PartsExpressInternational

Recently Viewed Products

Part # 260-441
Parts Express FacebookParts Express TwitterParts Express YouTubeParts Express PinterestParts Express SpotifyParts Express Instagram
Live Chat Software