1/4" (16-14) Female Disconnect Crimp Terminal Blue 50 Pcs.
1/4" (16-14) Female Disconnect Crimp Terminal Blue 50 Pcs. is rated out of 5 by 2.
Rated 3 out of 5
from NOT Copper, these are aluminum terminalsParts Express should note that these are made from aluminum not pure or tinned copper, they are not suitable for marine applications or outdoor connections where solder is planned or required for use to secure the wire to the terminal.For audio use in Home Theater or wiring that will not be exposed to the elements they are OK but not as strong as copper terminals. These terminals are OK if crimping is all you intend, do not plan to use solder to secure them in place.During use I also found these terminals were not consistent in their gap spacing to hold onto a 1/4" male spade and many had to be adjusted with pliers to make them tight enough to not fall off the intended male spade connection. In my application these were used to connect copper wire to speakers with 1/4" male spade connectors.
Date published: 2014-09-14
Rated 5 out of 5
from Gets the job doneThere's not much room for variation in this type of product, so all I can say is that they get the job done. I used these to connect some 14 AWG in-wall speaker cable to the tab terminals on the back of some Neutrik NL4MP-UC speakON panel mount jacks. Nice snug fit on both the cable and the panel jack tabs, worked like a charm.Note that a proper crimping tool is a must! Don't try to use a regular old pair of pliers...
Date published: 2012-02-13