| Item Number |
Image |
Description |
Quantity Remaining |
Pricing By Quantity |
| 269-708 |
 |
3/8" MYLAR DOME TWEETER, 4 OHM
Standard 3/8" mylar tweeter with square faceplate and 4 ohm impedance. Rear mounting may be required due to terminal locations.
Specifications: *Power Handling: 20 watts RMS/40 watts max *VCdia: 3/8" *Znom: 4 ohms Re: 3.50 ohms *Frequency range: 6,000-20,000 Hz *Fs: 4,200 Hz *SPL: 87 dB 2.83V/1m *Driver Dimensions: A: 2", B: 1-7/8", C: 5/8".
|
29,296 |
$0.25 |
| 269-754 |
 |
4" X 6" FULL RANGE SPEAKER WITH HOUSING, 2 OHM
Extended range oval speaker achieves good high frequency performance without the use of a whizzer cone. A special dustcap attached directly to the voice coil and a copper cap on the pole piece help extend the output up to a useable 10 kHz. Comes in an Delco injection molded housing.
Specifications: *Power Handling: 15 watts RMS/30 watts max *VCdia: 1" *Znom: 2 ohms *Re: 1.6 ohms *Frequency range: 105-10,000 Hz *Fs: 105 Hz *SPL: 90 dB 2.83V/1m *Driver Dimensions: A: 6-1/4" by 4-1/4", B: 5-5/8" by 3-1/2", C: 1-7/8".
|
330 |
$.40
|
| 269-782 |
 |
3/8" MYLAR NEO TWEETER ON POLE PIECE
3/8" Mylar tweeter with neodymium magnet mounted on a pole piece. Originally designed to be mounted on the pole piece of a driver to create a coaxial speaker. Tweeter can be easily removed from pole mount. Limited quantities.
Specifications: *Power Handling: 20 watts RMS/40 watts max *VC dia: 3/8" *Znom: 6 ohms Re: 4.00 ohms *Frequency range: 6,000-20,000 Hz *Fs: 4,200 Hz *SPL: 87 dB 2.83V/1m *Tweeter Dimensions: A: 1-3/8", B: 1", C: 1/2".
|
392 |
$0.32
|
| 269-788 |
 |
3/8" MYLAR TWEETER ON 6x9 BRACKET
3/8" mylar tweeter mounted on a standard 6 x 9 bracket. Allows the user to easily upgrade a factory "whizzer" cone 6 x 9 speaker to a coaxial type. Tweeter can also be used without bracket. Includes crossover capacitor. Limited quantities.
Specifications: *Power Handling: 20 watts RMS/40 watts max *VC dia: 3/8" *Znom: 4 ohms Re: 3.50 ohms *Frequency range: 6,000-20,000 Hz *Fs: 4,200 Hz *SPL: 87 dB 2.83V/1m *Tweeter Dimensions: A: 1-1/2", B: 1-3/8", C: 1/2". *Bracket Dimensions: W: 9" x 6-1/4", H: 3/8".
|
10,578 |
$0.20
|
| 269-789 |
 |
3/8" MYLAR TWEETER ON 4" BRACKET
3/8" mylar tweeter mounted on a standard 4"bracket. Allows the user to easily upgrade a factory "whizzer" cone 4" speaker to a coaxial type. Tweeter can also be used without bracket. Includes crossover capacitor. Limited quantities.
Specifications: *Power Handling: 20 watts RMS/40 watts max *VC dia: 3/8" *Znom: 6 ohms Re: 4.0 ohms *Frequency range: 6,000-20,000 Hz *Fs: 4,200 Hz *SPL: 87 dB 2.83V/1m *Tweeter Dimensions: A: 1-3/8", B: 1", C: 3/8". *Bracket Dimensions: W: 4-1/2" (pin cushion), H: 3/8".
|
4337 |
$0.20
|
| 269-790 |
 |
3/8" MYLAR TWEETER ON RH BRACKET
Standard 3/8" mylar tweeter mounted on a "right hand bracket". Tweeter element can be easily removed from bracket. Rear mounting may be required due to terminal locations. Crossover capacitor included. Limited quantities.
Specifications: *Power Handling: 20 watts RMS/40 watts max *VC dia: 3/8" *Znom: 4 ohms Re: 3.50 ohms *Frequency range: 6,000-20,000 Hz *Fs: 4,200 Hz *SPL: 87 dB 2.83V/1m *Driver Dimensions: A: 1-3/8", B: 1-1/4", C: 5/8".
|
2014 |
$0.20
|
| 269-791 |
 |
3/8" MYLAR TWEETER ON LH BRACKET
Standard 3/8" mylar tweeter mounted on a "left hand bracket". Tweeter element can be easily removed from bracket. Rear mounting may be required due to terminal locations. Crossover capacitor included. Limited quantities.
Specifications: *Power Handling: 20 watts RMS/40 watts max *VC dia: 3/8" *Znom: 4 ohms Re: 3.50 ohms *Frequency range: 6,000-20,000 Hz *Fs: 4,200 Hz *SPL: 87 dB 2.83V/1m *Driver Dimensions: A: 1-3/8", B: 1-1/4", C: 5/8".
|
701 |
$0.20
|
