SOLD OUT!! Onkyo 3/8" Mylar Tweeter On 6"x9" Bracket

Crazy cheap, but if you are going to use them off the bracket, make sure you don't pry them off using the weak connector tabs. Instead use one of the 5 small holes. I ordered 20 and broke about 4. Oh well, the caps that are included make up for it.

The supplied capacitor crosses it over very high.You can go a little lower but then it gets squarky and spitty. So you need a midrange unless you have a full range speaker with a whizzer cone. The way it's made with a very small flange when you pry it apart to use as a regular mounted tweeter, it's real hard to mount without whittling the hole, It can mount behind the baffle ok, I will pry them apart(they are glued together), glue them to a piece of thin sheet metal or plexiglass and useing 9 of them like a line array for a tweeter and crossing them over high .AS a add on tweeter for automotive use it's prolly ok to use as intended with a 6x9 with a whizzer cone.

Smooth tweeter. The bracket is easy to modify to fit many applications.